6. Auto Image Adjustment
6.3 Action
What can be done ?
The action function can be toggled between :
•full automatic : the best fitting file will be loaded automatically when a source is selected. At the same time the image will be automatically centered on the active surface of the LCD.
•on new file : only on a new file, the image will be centered on the active surface of the LCD.
•manual : the auto image function is switched OFF, no centering, no file load.
When is it disabled ?
The centering of the image will be disabled when :
•The black edges of the image take more than 25% of the complete image.
•The connected source is video,
•Custom file already exists.
Set up
To set up the Action function :
1.Push the cursor key ↑ or ↓ to highlight Action. (menu
2.Press ENTER to toggle between Full automatic, New File or Manual. Note: The values of automatically adjusted sources will not be saved.
AUTO IMAGE
ADJUST
ACTION : FULL AUTOMATIC
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
Menu
40 |
| R5976182 BARCOREALITY 6500 30012001 |