SECTION FIVE
Connecting the Evolution Two to Your System
This section describes Evolution Two Monaural Preamplifier connections and intro- duces the CAN Link remote control option.
Input and Output Connections
Krell recommends using its proprietary Krell CAST system for unparalleled sonic performance for connections between the Evolution Two preamplifier and other
The Evolution Two also offers balanced operation. The circuitry and connections associated with balanced operation not only can minimize sonic loss but also are immune to induced noise, especially for installations using long cables.
XLR Pin Configuration
Pin 1 | Ground |
Pin 2 | |
Pin 3 | Inverting (180O) |
Inputs and outputs are located on the Evolution Two back panels. Maintain the correct left/right orientation, when hooking up your system.
Left/Right Channel Orientation
Evolution Two preamplifiers are assembled as left or right channels. Preamplifier RCA connectors (31, 36, 38, 40) are color coded. Left preamplifier channels are assembled with white RCA connectors, and right preamplifier channels are assembled with red RCA connectors.
Connection Steps
Position each power supply and preamplifier chassis where you intend to use the connected channels. Do do not move the connected chassis after they are assembled.
26