Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER manual RC-5Control

LINK TRANSMIT, LINK RECEIVE.

8.Use the level control knob or up and down keys to scroll to: BACK.

9.Press the enter button or key to return to: TRIGGER 1.

10.Use the level control knob or the up and down keys to scroll to: TRIGGER 2.

11.Repeat Steps 3-7 to set Trigger 2.

ON

The 12 Volt trigger output is enabled at power on for the selected trigger (Trigger 1 or 2).

OFF

The 12 Volt trigger output is disabled at power on for the selected trigger (Trigger 1 or 2).

DELAY

The 12 volt trigger output is enabled at power on for the selected trigger (Trigger 1 or 2), and the delayed for a period of time (0-20 seconds).

RC-5 Control

This function enables you to change the link transmit status of the Evolution Two. The options are:

Enter the menu, then:

1.Use the level control knob on the preamplifier chassis front panel or up and down keys (16) on the remote control to select: RC-5 CONTROL.

2.Press the enter button on the preamplifier chassis front panel or the enter key (18) on the remote control. The front panel display (15) shows the default

mode: LINK TRANSMIT.

3.Use the level control knob or the up and down keys to select the desired

option: LINK TRANSMIT or LINK RECEIVE.

4.Press the enter button or key to confirm the selection. The front panel display

reads: RC-5 CONTROL.

The right-terminated preamplifier channel is the link transmitter of RC-5 data. Connect the RC-5 cable to the RC-5 connector on the right-terminated preampli- fier channel. For more information on linked preamplifier channels, see Appendix: CAN Link and Multiple Evolution Two Preamplifiers, on page 51.

43

continued