(SECTION SIX: Evolution Two Operation continued)
To Turn Off Your System
1.Place the amplifiers in the
2.Press the power button on the preamplifier chassis front panel or the pwr key
(3) on the remote control to switch the Evolution Two to the
3.Turn off the amplifiers using the back panel power switch or by disconnecting them from AC power.
4.Turn off the Evolution Two by unplugging the AC power cord from AC power.
Play and Record
The Evolution Two allows you to listen to one source through the main output (39 or 44), while recording a different source through the record bus output (37 or 38). A main bus tape output (35, 36) is also available and allows for the connection of a second recording device.
1.Press the power button (3) on the preamplifier chassis front panel (1) to switch the Evolution Two from
2.Press the input selection button on the preamplifier chassis front panel or the input selection keys (8, 9, 10, or 11) on the remote control to select the source that you want to listen to through the main outputs.
3.Begin playing the source. Use the level control knob on preamplifier chassis front panel or the level keys (16) on the remote control to adjust the volume to the desired listening level.
4.Press the record button on the preamplifier chassis front panel or the record key (13) on the remote control. The red record LED illuminates on the preampli- fier chassis front panel.
5.Press the input selection button or keys to select the source that you want to record through the record bus output. This source can be different than the source selected for the main bus outputs, in Step 2.
6.Press the record button or the main key (21) on the remote control, to return to the main bus output.
30
