Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER manual Menu Functions, AC Mains, Backlight

OFF, LOW (25%), MED (50%), HIGH (100%).

OFF, ON.

Menu Functions

AC Mains

This function enables you to operate the Evolution Two from a switched AC outlet. If AC Mains is set to ON, the preamplifier turns on immediately, by-passing stand- by. Thereafter, you may switch the preamplifier to and from stand-by, using the power button or pwr key (3). The options are:

Enter the menu, then:

1.Use the level control knob on the preamplifier chassis front panel or up and down keys (16) on the remote control to select: AC MAINS.

2.Press the enter button on the preamplifier chassis front panel or the enter key (18) on the remote control. The front panel display (15) shows the default mode: OFF.

3.Use the level control knob or the up and down keys to select the desired option: OFF or ON.

4.Press the enter button or key to confirm the selection. The front panel display

reads: AC MAINS.

OFF

The Evolution Two switches to stand-by mode, when it detects AC power.

ON

The Evolution Two turns on immediately, bypassing the stand-by mode, when it detects AC power.

Backlight

This function enables you to control the blue power indicator brightness. ￿The options are:

Enter the menu, then:

1.Use the level control knob on the preamplifier chassis front panel or up and down keys (16) on the remote control to select: BACKLIGHT.

2.Press the enter button on the preamplifier chassis front panel or the enter key (18) on the remote control. The front panel display (15) reads: BRIGHTNESS.

3.Press the enter button or the enter key again. The front panel display shows the default mode: HIGH.

4.Use the level control knob or the up and down keys to select the desired

brightness: OFF, LOW, MED, HIGH.

5.Press the enter button or key to confirm the selection. The front panel display

reads: BRIGHTNESS.

33

continued