Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER manual Clone

CLONE BEGIN.

FORCE RIGHT

Use to make a right channel respond as a left channel.

FORCE NONE

The preamplifier channel ignores balance selections. Use this option to set up more than 2 preamplifier channels.

NO OVERRIDE

Return to CHANNEL ASSIGN. Serves the same function as BACK in all other menu

items.

For more information on linked preamplifiers, see Appendix: CAN Link and Multiple Evolution Two Preamplifiers, on page 51.

Clone

This function enables you to transfer configured functions between linked pream- plifier channels. There is no need to configure multiple menu choices for each pre- amplifier channel. Clone insures that, where desired, the configuration of functions for multiple preamplifier channels is identical. The option is:

Enter the menu, then:

1.Identify the clone transmitter and clone receiver. The clone transmitter is the preamplifier channel that transmits the clone and the clone receiver(s) is/are the preamplifier channel(s) that receive(s) the clone.

2.Use the level control knob on the preamplifier chassis front panel (1) of the clone transmitter, or the up and down keys (16) on the remote control to select:

CLONE.

3.Press the enter button on the preamplifier chassis front panel (1) of the clone transmitter or the enter key (18) on the remote control. The front panel display (15) reads: CLONE BEGIN.

4.Press the enter button or the enter key again. The clone transmitter display reads: CLONE TRANSMIT and the clone receiver display(s) read(s): CLONE RECEIVE.

5.Press the enter button on the front panel of the clone transmitter. All clone receivers go into stand-by mode, indicating that the clone is accomplished.

Note

The enter button on the remote control cannot be used to activate the clone function.

35

continued