SECTION THREE
Quick Start
To access the full array of available functions for the Evolution Two Monaural Preamplifier, please read the entire owner’s reference manual. The abbreviated routine in this Quick Start section will allow you to connect and operate the Evolution Two quickly and enjoy its basic functions.
Evolution Two preamplifier channels may be operated independently, or they may be operated in linked mode, using CAN Link.
Connecting the Evolution Two to Your System
Position each power supply and preamplifier chassis where you intend to use connected channels. Do do not move the chassis after they are connected.
1.Connect the power supply chassis and the preamplifier chassis with the
IMPORTANT
Never connect two power supplies together.
2.In order to operate the Evolution Two preamplifier in linked mode, connect the preamplifier channels together with the supplied
When a system with linked preamplifier channels is powered on, left/right ori- entation is established immediately, with no user intervention. For more infor- mation on linked preamplifiers, see Appendix: CAN Link and Multiple Evolution Two Preamplifiers, on page 51.
3.Neatly arrange and organize wiring to and from the Evolution Two preamplifier and all components. Separate AC wires from audio cables to prevent hum or other unwanted noise from being introduced into the system.
4.Connect the outputs of your source equipment to the appropriate CAST (34), balanced (30),
5.Connect the appropriate main outputs
13
continued
