Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER Remote Control Description, Level Control

(SECTION FOUR: Anatomy of an Evolution Two continued)

Remote Control Description

See Figure 2 on page 16

The Evolution Two Monaural Preamplifier remote provides all of the power, pream- plifier, level control, and navigate/customize functions outlined under Front Panel Description, pages 17-19.The remote control provides additional functions, including CD functions and menu configuration, accessed using only the remote control keys.

Battery Installation and Removal

The Evolution Two preamplifier remote control uses 2 AAA-size 1.5 Volt batteries. Batteries are included with the shipment. To install the batteries:

1.Remove the remote control backplate, using the supplied T-10 Torx wrench.

2.Install the batteries, following the battery position diagram on the plastic bat- tery receptacle.

3.Replace and secure the backplate.

Notes

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not used for a long period of time. Battery leakage can damage the remote control.

Preamplifier Functions

21Main Bus Key

Use this key to select the input for the main bus output. The red main LED illu- minates, when this function is selected. For more information, see Play and Record, on page 30.

Level Control

22Bal(ance Key)

Use this key, along with level keys or the level control knob (16) on the pream- plifier chassis to balance left and right output levels. The front panel display (15) shows the left and right balance offset.

20