SECTION SIX
Evolution Two Operation
The Evolution Two Monaural Preamplifer is easy to operate. Instructions follow for
on/off and
IMPORTANT
Always mute or fully attenuate the preamplifier level when switching sources.
Do not change input connections to the amplifier when the amplifier is on.
Use care when setting high playback levels. Always lower the volume level at the first sign of loudspeaker distress.
On/Off and Stand-by Operation (Linked Mode)
When powering on any system, turn on amplifiers last. When powering down, turn off amplifiers first.
After the Evolution Two is connected to your system and to AC power, and the front panel display (15) has stopped scrolling, begin operation:
1.Press the power button on either preamplifier chassis front panel or the pwr key (3) on the remote control. The blue backlights illuminates, the red
2.With the Evolution Two preamplifier output muted or the volume fully attenuat- ed, select a source manually using the front panel input select buttons or the input select keys on the remote control (8, 9, 10, 11). Start playing the source. Use the level control knob or level keys (16) to set the volume to a comfortable listening level.
3.To return the Evolution Two to the
Krell recommends leaving the Evolution Two in the
29
continued