Link Control (CAN Link)
This function enables you to link and unlink preamplifiers. The options are: LINKED,
UNLINKED.
Enter the menu, then:
1.Use the level control knob on the preamplifier chassis front panel or the up and down keys (16) on the remote control to select: LINK CONTROL.
2.Press the enter button on the preamplifier chassis front panel or the enter key (18) on the remote control. The front panel display (15) shows the default
mode: LINKED.
3.Use the level control knob or the up and down keys to select the desired
option: LINKED, or UNLINKED.
4.Press the enter button or key to confirm the selection. The front panel reads:
LINKED.
LINKED
When preamplifier channels are linked, power, volume, balance, phase, record, mute, and input selections are automatically communicated between linked pre- amplifier channels. All other settings remain local and may be cloned from one preamplifier channel to another. See also Clone, on page 35, and Software Clone, on page 45.
UNLINKED
When a preamplifier channel is unlinked, it does not respond to commands from any other linked preamplifier channels. After the preamplifier channel is unlinked, settings can be changed, independent of other preamplifier channels.
For more information on linked preamplifier channels, see Appendix: CAN Link
and Multiple Evolution Two Preamplifiers, on page 51.
41
continued
