(SECTION SEVEN: Customizing the Evolution Two continued)
Recall
This function enables you to access factory default settings or your own saved settings, or to undo a clone. The options are:
Enter the menu, then:
1.Use the level control knob on the preamplifier channel front panel or up and down keys (16) on the remote control to select: RECALL.
2.Press the enter button on the preamplifier channel front panel or the or enter key (18) on the remote control. The front panel display (15) shows the default
mode: FACTORY.
3.Use the level control knob or the up and down keys to select the desired
option: FACTORY, SAVED, or CLONE UNDO.
4.Press the enter button or key to confirm the selection. The front panel display
reads: RECALL.
FACTORY
Recalls the factory settings.
SAVED
Recalls settings previously stored in memory using the SAVE function. See also
Save, on page 45.
CLONE UNDO
Cancels clone settings. All settings revert to the last settings in memory prior to cloning. See also Clone, on page 35.
RS-232 Control
17 Menu Button or Key Enter or exit the menu.
16 Volume Knob or Level Keys
Navigate the menu hierarchy, review functions and configu- ration options.
18 Enter Button or Key Select a configuration option or confirm a selection.
BACK
Scroll up the menu hierarchy, or exit a menu option without confirming it.
This function enables you to change the link transmit status of the Evolution Two. The options are
Enter the menu, then:
1.Use the level control knob on the preamplifier channel front panel or up and down keys (16) on the remote control to select:
2.Press the enter button on the preamplifier channel front panel or the enter key (18) on the remote control. The front panel display (15) shows the default
mode: LINK TRANSMIT.
3.Use the level control knob or the up and down keys to select the desired
option: LINK TRANSMIT, or LINK RECEIVE.
44