(SECTION SEVEN: Customizing the Evolution Two continued)
CLONE BEGIN
Sends the message that a clone is about to begin, from the clone transmitter to the clone receiver(s).
CLONE TRANSMIT
Once the clone begin message is sent, the clone transmitter display reads: CLONE TRANSMIT, indicating that the preamplifier is ready to transmit the clone data.
CLONE RECEIVE
Once the clone begin message is sent, the clone receiver(s) display reads: CLONE RECEIVE, indicating that the preamplifier(s) is(are) ready to receive the clone data.
Note
In order to set a clone receiver to ignore the clone, use the level control knob on the clone
receiver front panel to scroll to CLONE IGNORE.
Display
17 Menu Button or Key Enter or exit the menu.
16 Volume Knob or Level Keys
Navigate the menu hierarchy, review functions and configu- ration options.
18 Enter Button or Key Select a configuration option or confirm a selection.
BACK
Scroll up the menu hierarchy, or exit a menu option without confirming it.
This function enables you to turn on the front panel display (15) all the time, or turn it off after a time out. The options are: ON, TIMED.
Enter the menu, then:
1.Use the level control knob on the preamplifier chassis front panel or the up and down keys on the remote control (16) to select: DISPLAY.
2.Press the enter button on the preamplifier chassis front panel or the enter key (18) on the remote control. The front panel display (15) reads: MODE.
3.Press the enter button or key (18) again. The front panel display shows the default mode: ON.
4.Use the level control knob or the up and down keys to select the desired option: ON or TIMED.
5.Press the enter button or key to confirm the selection. The front panel display reads: MODE.
6.Use the level control knob or the up and down keys to select: BRIGHTNESS.
7.Press the enter button or key. The front panel display shows the default mode:
HIGH.
8.Use the level control knob or the up and down keys to select the desired
brightness: OFF, LOW (25%), MED (50%), or HIGH (100%).
9.Press the enter button or key to confirm the selection. The front panel display
reads: BRIGHTNESS.
36
