Pairing ezSpeak to Your Mobile Phone
Pairing is the process of linking ezSpeak with your Bluetooth mobile phone or other Bluetooth device that supports a headset and/or handsfree profile. Before using ezSpeak with your mobile phone you must pair the devices. After this process is complete, you can use ezSpeak with your paired mobile phone.
You can pair ezSpeak with up to seven Bluetooth devices. Once each device is paired with ezSpeak, you must disconnect the paired phone or device to connect to a different phone or device. While connected to a different paired device, ezSpeak will not be connected to other paired devices.
BEFORE YOU PAIR ezSPEAK, ENSURE THAT THE BATTERY IS FULLY CHARGED, AND REVIEW THE INSTRUCTIONS IN YOUR MOBILE PHONE USER GUIDE FOR PAIRING YOUR MOBILE PHONE TO A BLUETOOTH DEVICE.
To Pair the Devices
1.With the ezSpeak turned on, press and hold 
until “Ready to Pair” appears on the display (approximately five seconds).
2.With the mobile phone turned on, initiate the Bluetooth
3.Follow the mobile phone/device prompts, and when prompted for the passkey (also called passcode or BT PIN), enter 1234 (the ezSpeak passkey). When pairing is complete, ezSpeak is placed in standby mode, and ET6000 appears on the display.
4.Press 
to connect ezSpeak with the paired phone. “Connecting,” followed by the name of the phone, will appear on the display to indicate the phone is connected to ezSpeak.
NOTE: Once you’ve paired your phone with ezSpeak, you don’t need to repeat this entire procedure. Simply follow step 4 above to connect to the last paired phone, or the last connected phone.
USER GUIDE | 5 |