Mounting ezSpeak
When used in a car, ezSpeak is designed to be mounted to your car visor. You can use the visor clip with or without the optional swivel clip.
To Mount ezSpeak with the Visor Clip
1.Attach the visor clip to ezSpeak by sliding the clip into the bracket on the rear of ezSpeak as shown.
2.Slide the clip onto your car visor.
To Mount ezSpeak with the Visor Clip and Swivel
1.Remove the small bracket from the visor clip by lifting up on the prong and pulling the small bracket away from the visor clip.
2.Attach the swivel bracket to the visor clip by sliding the bracket onto the clip while lifting the prong. The bracket
will snap into place.
3.Attach the swivel bracket into the bracket on the rear of ezSpeak as shown.
4.Slide the clip onto your car visor, as shown above, adjusting the position as needed.
5.Turn the swivel screw to tighten the clip as shown.
6