Pairing ezTalker digital to Your Mobile Phone
Pairing is the process of linking the headset with your Bluetooth mobile phone or other Bluetooth device that supports a headset and/or handsfree profile. Before using ezTalker digital with your mobile phone you must pair the devices. After this process is complete, you can use the headset with your paired mobile phone.
You can pair ezTalker digital with up to seven Bluetooth devices. Once each device is paired with the headset, you must disconnect the paired phone or device to connect to a different phone or device. While connected to a different paired device, ezTalker digital will not be connected to other paired devices.
BEFORE YOU PAIR THE HEADSET, ENSURE THAT THE BATTERY IS FULLY CHARGED, AND REVIEW THE INSTRUCTIONS IN YOUR MOBILE PHONE USER GUIDE FOR PAIRING YOUR MOBILE PHONE TO A BLUETOOTH HEADSET.
To Pair the Devices
1.Turn on the mobile phone/device and place it next to the headset.
2.Initiate the Bluetooth
3.With the headset turned off, press and hold the TALK button until “Pairing” appears on the display (approximately five seconds).
4.Release the TALK button. The headset is now in pairing mode.
5.Follow the mobile phone/device prompts, and when prompted for the passkey (also called passcode or BT PIN), enter 0000 (the ezTalker digital passkey). When pairing is complete, the headset will be placed in standby mode, ready to make and receive calls. “Ready” will appear on the display, and the blue LED will flash at
USER GUIDE | 5 |