Using ezTalker digital
Powering ezTalker digital
To Turn On the Headset
1.Press and hold the TALK button approximately four seconds until “On”, then “Standby” appears on the display, or until you hear the ON tone. The headset turns on and is placed in standby mode, ready to make and receive calls.
Note: To conserve power, the display will turn off after being idle for 18 seconds. To view the display, simply press any button.
To Turn Off the Headset
1.With both the headset and the display turned on, press and hold the TALK button approximately four seconds until “Off” appears on the display and the headset turns off, or until you hear the OFF tone.
Understanding the Display
The display is made up of four sections including status icons, caller ID, caller name, and headset status. A sample display is shown on page 8.
USER GUIDE | 7 |