Transferring Calls, Adjusting the Volume

U S E R G U I D E

Transferring Calls

You can transfer calls from your mobile phone to your headset.

To Transfer Calls from Your Mobile Phone To The Headset

1.With the call connected to your mobile phone, press the TALK button on your headset.

Adjusting the Volume

To Increase the Volume

1. Press and release the top of the VOLUME
button + to increase the volume one level.	Figure 5.
Repeat until you have reached the desired	Volume buttons
level.

To Decrease the Volume

1.Press and release the bottom of the VOLUME button - to decrease the volume one level. Repeat until you have reached the desired level.

Muting EZTALKER

You can mute and un-mute the microphone temporarily so that you cannot be heard by the connected party.

To Mute the Headset

1.Press and hold either VOLUME button (+/-) for three seconds. While the headset is muted, you will hear a beep every four seconds.

To Un-Mute the Headset

1.When the microphone is muted, press and hold either VOLUME button (+/-) for three seconds.

Storing EZTALKER

When you’re not using ezTalker, you can store it in the charging cradle.

Visual And Audible Indicators

Two LEDs (blue and amber) indicate the status of the headset, while tones heard through the headset provide an audible indication of a requested action. Following are descriptions of visual and audible indicators provided by your ezTalker headset.

Visual Indicators

LED Status	Indicates
Blue LED flashes at two-	Headset is in standby mode,
second intervals	ready to make and receive calls
Blue and amber LEDs flash	Headset is in Pairing Mode
alternately
Amber LED flashes	Battery is low
Both LEDs are off	Headset is off
Audible Indicators
Tone	Indicates
Series of tones, increasing in	Headset has been turned on.
pitch
Series of tones, decreasing	Headset is about to turn off.
in pitch
One long beep and one short	Battery is low
beep every 32 seconds
Double chime	Headset has been put into
	Pairing Mode.
Beeps every four seconds	Headset is muted.

Troubleshooting

If your headset is not communicating with your mobile phone, ensure that the headset is on and charged, and that you have paired the headset with your mobile phone.

If you encounter poor reception via the headset, verify that you have good reception on your mobile phone or move closer to your mobile phone. If the reception is still poor, try moving the mobile phone away from your body, or to the same side of your body as your headset.

If you are in a noisy environment and your mobile phone does not accept voice commands, dial the number from the mobile phone keypad as the loud background noise may interfere with voice commands.

U S E R G U I D E