To stop auto-scan:
Press . The unit will revert back to the original channel that was
set prior to scanning.
NOTE: If you activate a scan while your code is set to 0, the radio will check for any activity on each channel, regardless of the code used on that channel. If you activate a scan while the code is between 1 and 38, the radio will only check for activity on the specific channel and code combinations set on your radio.
RESET
To reset to the default settings, remove the batteries and power adapter and leave for several minutes.
TROUBLESHOOTING
See below for some common problems and their remedies. DO NOT attempt any repairs yourself. This will invalidate your warranty.
PROBLEM | POSSIBLE CAUSES / REMEDIES |
|
Can’t turn the radio | ● Check the battery is correctly installed |
|
on | and has been fully charged |
|
Can’t communicate | ● Check the channel and CTCSS code |
|
with other radios |
|
|
No information is | ● Reset by removing the batteries and power |
|
displayed on the | adapter for several minutes. This will return |
|
LCD display | the unit to the default settings |
|
VOX function is not | ● Check the headset is correctly plugged in and |
|
working | is compatible with the TP391 radio |
|
EN
14