3.Press to confirm and move to the next setting or press
to confirm the changes and exit the Menu Options. Settings will automatically be confirmed after 5 seconds if no key is pressed.
select a channel or CTCSS
The transmitter and receiver must be on the same channel using the same CTCSS code in order for you to communicate with another party.
This feature allows you to utilize a less
To select between 8 channels or 38 CTCSS codes:
1.Press once (for channel) or twice (for CTCSS code) until the corresponding channel / CTCSS number starts flashing.
2.Press and hold or to change the channel or CTCSS code.
3.Press to confirm and exit the menu. Or, press to confirm and go to the next Menu Option.
NOTE: To communicate with other units that do not have CTCSS code capability, switch your unit to the same channel and set the CTCSS code to “0”.
TIP: Before trying to transmit on the selected channel, press to check the activity on that channel. If someone is already on the selected channel, try another channel that is clear. To change the basic channel, in
menu mode, press or to move to the next higher or lower channel number.
EN
10