DigiTech Station User’s Guide |
Transferring Outside Calls
l To announce a call before transferring it,
1.answer outside call,
2.press TFIANSKONF (call is placed on hold),
3.dial station number,
4.upon answer, announce the call,
5.hang up the handset (call is transferred).
l To transfer a call without first announcing it,
1.answer outside call,
2.press TRANSKONF (call is placed on hold),
3.dial station number,
4.hang up handset. Call will
lIf you hear a busy signal or receive no answer,
press TFtANSKONF and return to outside call.
Conferencing Stations Together
l To conference any combination of inside stations and outside lines,
1.make first call and press TRANSICONF,
2.make next call and press TRANSlCONF to establish conference,
3.repeat steps to add up to two more parties.
NOTE: When setlfng up a conference call with outside lines and inside stations, you must call the outside lines first. Use the line group access codes to place the outside lines in your conference.
lTo drop outside lines from the conference,
1.first press HOLD to place all calls on hold (not doing this will result in a tone burst interrupttng the remaining conferees),
2.once all calls are on hold, press the line that you wish to bring back followed by TFtANSKONF; this will retrieve only that line to the conference,
3.use step two to bring back each line from hold.