Vertical Communications 7714s, 7714X manual Making Calls

Page 6

DigiTech Station User’s Guide

GCA70-280

l To respond verbally,

1.Press and hold MUTE,

2.speak into handset.

lTo respond non-verbally,

1.press pre-programmed button (see page 16 of this manual for further instructions on programming this function).

NOTE: Announcing stafon must have LCD speakerphone.

. To Block SOHVA,

NOTE: You may block SOHVA only if your telephone is programmed for you to do so.

1.lift handset,

2.press ITCM and dial +K2,

3.turn SOHVA back on by lifting the handset, pressing ITCM, and dialing W2.

Making Calls

lTo make a call,

1.fii handset, select line (unless your telephone selects it for you), or select intercom: and listen for dial tone,

2.either dial number, or press HOLD then, press autodial, use speed dial feature, use redial feature, or press Direct Station Select (DSS) if making an Intercom call.

lTo dial autodial number,

1.press preprogrammed button. If button is programmed at the second level of a DSS button, press HOLD before pressing autodial button,

2.when called party answers, lfft handset.

lTo dial personal or system speed dial number,

1.dial desired code:

1-O= personal spaed dial number, +klO -*99 = system speed dial number,

if you select a line, press HOLD then dial code,

2.when called party answers, Ml handset.

lTo redial the last number that you dialed at your telephone,

1.lift handset and dial #,

if you select a line, press HOLD then dial #,

2.when called party answers, lift handset.

Image 6
Contents DIG/TECH Introduction Typical DigiTechUnderstanding the Lights on Your Telephone Uwersranamg me Lignts on Your Telephone -cont Using the Speakerphone Answering CallsAnswering Subdued-Off Hook Voice Announcements SOHVACalls Making Calls Holding Calls To answer a call at the extension receiving held call To cancel directed call hold and retrieve the callTo place a call on hold at another telephone To parka callTransferring Outside Calls Conferencing Stations TogetherUsing Messaging Feature Using the Recall/Flash FeatureSwitching Between Pulse and Tone Making a Paging AnnouncementForwarding Calls Using Automatic Call-Back Using Call WaitingEngaging Automatic Set Relocation Programming Your TelephoneTo store special purpose feature buttons To store personal speed dial numbersIndex SohvaComdial