5.5Backlit display
When you receive a call or press any key, the LCD will light up. It will turn off after 10 seconds when no key is pressed.
5.6Call back from the caller ID memory
1.Press REVIEW 
or 
button to find the Caller ID memory location to be redialed.
2.Press CALL BACK button once to redial, the LCD shows ‘DIALING
...’ and the phone number to be dialed immediately. The LCD then shows ‘PICK UP HANDSET’.
Note: If you pick up the handset before pressing the CALL BACK button, ‘REPLACE HANDSET’ will appear. Replace the handset than the number will be redialed and ‘PICK UP HANDSET’ will appear.
3.Pick up the handset on the telephone (not supplied) connected to the same telephone line as the AM880 and carry on your call as normal.
6 Remote operation
While you are away from your home or office, you can access your AM880 at any time and check your messages.
1.Dial your phone number.
2.When your outgoing message is playing, enter your remote operation security code (the security code label is located on the bottom of the AM880).
3.Two beeps will confirm that the right code has been entered. Now select one of the remote commands. If no key is pressed for approx. 10 seconds, the AM880 will hang up.
Press: | To: |
1# | Playback new messages |
2# | Playback all recorded messages |
| When you press 1# to playback new messages, or |
| 2# to play all messages, you can then press the |
| following keys to get these remote functions. |
3# | Delete current message and delete all message |
| after playback |
4# | Repeat previous messages |
5# | Stop playback |
6# | Skip current message |
9