5.2Receiving calls
During an incoming call, NEW appears and the New Call LED blinks while the phone is ringing. The number of new and total calls appear. The New Call LED blinks until all the new calls have been reviewed.
•If only the caller’s phone number is received, the caller’s phone number with the call time and date appear.
•If an incorrect, invalid or incomplete signal is received, ‘LINE ERROR’ appears.
•If the name and number are unlisted, ‘PRIVATE’ appears with the call time and date.
•If the name and number are not available, ‘UNAVAILABLE’ appears with the call time and date.
If no key is pressed within several seconds, the LCD will return to standby mode, and display the total call counter, new call counter, current time and date.
5.3Reviewing caller ID records
Each Caller ID record includes the time and date of the call, the call number (determined by the order in which the calls are received), the caller’s telephone number, and the caller’s name (if available).
1.Press REVIEW 
button to review the latest number, or press REVIEW 
button to review the oldest number.
After you view all the calls in memory, ‘END OF LIST’ appears and the New Call LED turns off.
2.To view them again, press REVIEW 
or 
button.
Note: REPEAT appears if you receive more than one call from the same number.
5.4Deleting caller ID records
Note: You must review all new calls before you can erase all calls.
Deleting a single record
1.Press REVIEW 
or 
button until you see the record you want to delete.
2.Press ERASE button once. ‘ERASE?’ appears.
3.Hold down the ERASE button until ‘ERASED’ appears.The remaining Caller ID records are renumbered automatically.
Deleting all records
1.After reviewing all new messages, press and hold ERASE button until ‘ERASE ALL?’ appears.
2.Hold down the ERASE button until ‘ALL ERASED’ appears.
8