Oricom warranty Remote Turn on/off the AM880, Re-record an OGM, Remote Record Memo

Page 11

4.After all your messages have been played, you hear two short beeps. You have 10 seconds to access the menu again, otherwise, the

AM880 disconnects automatically.

Press:

To:

 

7#

Remote Turn on/off the AM880

 

If you forget to turn your AM880 on, you can phone

 

in from a remote location to turn it on.

 

1.

Call your telephone number.

 

2.

The AM880 answers after 10 rings. After the

 

 

beep, enter your 3-digit security Code.

 

3.

After the second beep, press 7# then hang up.

 

 

Subsequent messages will be recorded

8#

Re-record an OGM

 

1.

When you hear a beep, begin recording your new

 

 

OGM (up to 5 minutes).

 

2.

When you have finished recording your new

 

 

OGM, press 5#.

 

 

The new OGM will playback to you.

 

3.

Hang up the telephone.

9#

Remote Record Memo

 

If you press 9# (to record memo):

 

1.

When you hear a beep, begin recording your

 

 

memo.

 

2.

When you have finished recording your memo

 

 

message, press 5#.

 

 

(press 5# to stop recording)

0#

Remote Room monitoring

 

If you press 0# (to room monitoring):

 

1.

The built-in microphone of your answering

 

 

machine will be switched on and you can then

 

 

listen in on the room.

 

2. Every 30 seconds you will hear a beep. If you

 

 

want to continue listening, press 0# again within

 

 

10 seconds. Otherwise the AM880 will hang up.

 

3.

To end room monitoring, hang up the telephone

 

 

or press 5# if you want to use other remote

 

 

functions.

10

Image 11
Contents Oricom AM880 Digital Answering System With Caller ID N13134 Location of controlsConnecting the telephone line Installing your Oricom AM880Setting up your AM880 To record your own OGM up to 5 minutes in length Turning the AM880 on and OFFGeneral operation Setting the number of ringsUsing the announce-only feature Answering system operationPlaying messages Adjust the speaker volumeRecording a personal memo Recording a 2-way phone conversation Caller ID operationDeleting messages Screening callsDeleting all records Receiving callsReviewing caller ID records Deleting caller ID records Deleting a single recordCall back from the caller ID memory Remote operationBacklit display Remote Room monitoring Remote Turn on/off the AM880Re-record an OGM Remote Record MemoCustomers using another company’s toll service To Retrieve Messages when Recording Memory is FullTroubleshooting Temperature and ambient conditionsCleaning and care Technical support Warranty informationAustralia New Zealand