Oricom SLIM-9000 user manual Battery performance, Tip

Page 8

6Getting started

Battery performance

In ideal conditions, fully charged batteries should give about 10 hours talk time or 100 hours standby time on a single charge. Note that new batteries do not reach full capacity until they have been in normal use for several days.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/standby time. Eventually they will need to be replaced.

Batteries and handset may become warm during charging. This is normal.

Tip!

It is good practice to put the cordless handset on the charging cradle when it is not in use to ensure that the handset is always fully charged.

WARNING

DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY Ni-MH RECHARGEABLE BATTERIES AS SPECIFIED IN THIS USER GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

Never use alkaline or lithium batteries.

Do not dispose of the batteries in a fire, as they can explode.

Do not open or mutilate the battery. Released electrolyte is corrosive and can cause damage to the eyes or skin. It can be toxic if swallowed.

Avoid contact with metal objects when handling the battery. These objects could short out the batteries or cause the conductor to overheat resulting in burns.

Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin.

Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion.

Remove the batteries if you do not plan to use the product for several months at a time.

Follow the local regulations regarding the disposal of your packing materials, exhausted batteries and used phone. Wherever possible, recycle those materials.

Never use non-rechargeable batteries. Use recommended type supplied with this product.

Image 8
Contents Slim-9000 Page Contents Answering Machine Default Settings Getting started Avoid exposure of this telephone to moisture or liquidSignal strength Installation and ChargerBattery low warning LocationBattery performance TipPack contents Purchasing additional handsetsHandset Overview Left Base Station Overview Message IndicatorVolume + Skip Forwards/Backwards Handset LCD Display Icons DescriptionUsing the phone Power on the HandsetMake an External Call Answer a CallAdjust Earpiece and Handsfree Volume Set the Silent ModeEnd a Call Mute a CallMake an Internal Call For multi-handset versions only Keypad LockFind Handset Make a 3-way conference call Switch calls between an external call and an internal callTransfer an external call to another handset During a call Phonebook Add a New EntryEdit an Entry View an EntryCopy Phonebook to Another Registered Handset Delete an EntryDelete the Entire Phonebook View Phonebook Capacity Caller List View the Call ListStore a Call List Number into the Phonebook Dial a Call List NumberDelete an Entry in the Call List Delete the Entire Call ListClock & Alarm Date & TimeAlarm Set and turn on the alarmSet the alarm melody Turn off the alarmSettings Handset SettingsRename the handset Press OK to confirm the new nameSet the contrast level Turn on or off the auto answerReset handset settings to default Press OK to confirm the number to be barredSelect base station Set the SOS numberBase Settings De-register a HandsetPress Select to confirm the handset de-registration Change the Recall TimeRegistration Reset base settings to defaultFull ECO Mode Turn the Answering Machine On/Off Listen to the Messages in the Answering MachineDelete All Messages in the Answering Machine Record MemoPress Select and UP/DOWN to scroll to Memo DisplayedAnswering Machine Settings Set the Answer ModeSet the Outgoing Message Language Country Dependent Record Your Own Outgoing Message OGMActivate Remote Access Set the Answer DelayPlayback the Outgoing Message OGM Playback the OGMActivate or Deactivate the Remote Access Change the 4-Digit Remote Access PINPress Down to enter the new remote access PIN Call Screening PINDefault Settings Items Default ValuesTroubleshooting Problem Possible causes Solutions Bad audio quality ServiceOther electrical appliances Extension leadsCannot access Switch Remote access onBase Phonebook is fullWarranty Information Australia By modification or service by anyone other thanWarranty Appendix Caller ID Customer Support