Redialling the last dialled number, Call timer

Redialling the last dialled number

1.Press . The last number dialled is displayed.

2. turns on when the number contains more than 12 digits. Press OK to view the off-page digits.

3.Press to dial out the number.

During an external call

Call timer

01-10

The call timer will be displayed a short while after your call is connected. It shows the duration of the call. This timer is shown in minutes and seconds (MM-SS) in the first hour. After that, it will be shown in hours and minutes (HH-MM) with the “-“ blinking to indicate the seconds. When you end a call, the timer will be displayed for 5 more seconds before the screen returns to the handset label.

Adjusting the volume

Press to adjust the receiver volume. The display shows the volume level of high “OOO”, medium “OO” or low “O”.

Muting the call

1.Press MUTE to mute the call. turns on. The caller would not be able to hear you but you would still be able to hear the caller.

2.Press MUTE again to unmute the call.

Chain dialling

You can dial out numbers from the phonebook even after you have seized the phone line. And there is no limit to the number of times chain dialling is accessed.

1.Press . turns on.

2.Press to scroll through the phonebook records. Or you can use the number keys to jump directly to the record starting with the corresponding letters of that key. If you decide to quit using chain

dialling, simply press to exit.

3.Press OK to dial out the number.