Oricom P700 manual Security PIN, Remote access

1. Press RING during standby. The 7-segment LCD displays the current setting such as r2 for 2 rings.

To change the ring delay setting,

1.Press RING for 2 seconds. The 7-segment LCD displays the current setting such as r2 for 2 rings.

2. Use

VOL-

or

VOL+

to adjust the number of rings.

3.Press RING setting.

again to confirm. The 7-segment LCD displays the new

Security PIN

A three-digit PIN is required for remote access. The factory preset code is “000”. You can change it to a unique code of your own. This PIN code can be up to 3 digits long.

NOTE: The security PIN is different from the 4-digit PIN which is used for registering/de-registering your handset(s).

To review the Security PIN,

1. Press PIN during standby. The 7-segment LCD displays the current PIN digit by digit.

To change the Security PIN,

1.	Press				PIN	for 2 seconds during standby.
2.	Use		VOL-			or				to change the first digit.
								VOL+
3.	Press				PIN	to		confirm		the first digit.
4.	Use					or				to change the second digit.
		VOL-					VOL+
5.	Press				PIN	to confirm the second digit
6.	Use		VOL-			or			VOL+	to change the third digit.
7.	Press			PIN		to confirm the third digit. The 7-segment LCD displays the

new PIN digit by digit.

Remote access

You can access your answering machine when you are away from home by using a touch tone phone.

NOTE: You need to enter the security PIN to access the answering machine remotely.

26