MENU OPERATION 19
Set Time
1. Press [ 
] key.
0RESSE; = ORR;;nn==KEY TOOSELECT h(3(3%44).'3v AND
press [ 
= KEY PRESSR;E S=SOR ; n = KEYYTO SELECTSh$!4%
4)-% 3%44).'3v PRESSE;;
] key, then press [ + ] or
;;nn==KEY TO SELECT 
] key, press
;; = OR ; n = KEYYTO SELECTSh4)-%v PRESS ; 
] key.
)NPUTP THEH CORRECTR TIME USINGI THEH KEYPAD A THEH (2 FORMATAIS HOURMINUTETHOURORANGE MINUTETRANGE THEH (2 FORMATAIS HOURMINUTET HOURORANGE MINUTETRANGE
4.Press [ 
] key to confirm the setting.
Note:
If the input value is over the range, the handset will beep and will not store the input value. Please input the correct setting again.
Earpiece Boost Mode
It is possible to select different options with boost mode and be able to adjust the level during a call.
1. Press [ 
] key.
0RESSE; = ORR;;nn==KEY TOOSELECT h(3(3%44).'3v AND
press [ 
] key.
0RESSE; = ORR;;nn==KEY TOOSELECT h"//34
press [ 
] key.
0RESSE;; ==OR ;;nn==KEY TO SELECT THEHDESIREDIOPTION SEE table below for options).
5. Press [ | ] key to confirm the setting. | |
|
| |
Option | Description | |
|
| |
Off | No boost mode access | |
|
| |
/.,/7 | $URINGNAGCALL PRESSL;L = KEYYTO ACCESSAUP TOE | |
the lowest boost level with receiver. | ||
| ||
|
| |
$URINGNAGCALL PRESSL;L = KEYYTO ACCESSAUP TOE | ||
the medium boost level with receiver. | ||
| ||
|
| |
/.()'( | $URINGNAGCALL PRESSL;L = KEYYTO ACCESSAUP TOE | |
the highest boost level with receiver. | ||
| ||
|
| |
| $URINGNAGCALL PRESS AND HOLD ; = KEYYTO | |
| access up to the highest boost level with | |
AUTO | receiver. | |
| However, the handset will restore to normal | |
| volume after you end the call. | |
|
|