22MENU OPERATION
Base Ringer Volume
9OU MAYYSELECT ONENOF THEH AVAILABLE VOLUMES FOR YOUR incoming call alert tone. The default setting is volume 3.
1. Press [ 
] key.
0RESSE; = ORR;;nn==KEY TOOSELECT h"3"3%44).'3v AND
press [ 
] key.
3.“INPUT PIN” will be shown, Input the correct PIN code
and press [ 
] key.
0RESSE ; = OR ;; nn == KEY TO SELECT h"!3%! 2).'%2
6/,5-%v AND PRESS ; 
] key.
0RESSE;; ==OR ;;nn==KEY TO SELECT THEHDESIREDIRINGNVOLUME the selected volume will be sounded.
6 Press [ 
] key to confirm the setting.
Change PIN
PIN is your base’s identification number, the default setting IS hv 9OU MAYYCHANGE THEH0). 0LEASE TAKEENOTE OF THEH change.
1. Press [ 
] key.
0RESSE; = ORR;;nn==KEY TOOSELECT h"3"3%44).'3v AND
press [ 
] key.
3.“INPUT PIN” will be shown, input the correct PIN code
and press [ 
] key.
0RESSE;S S= OR ; n = KEY TOTSELECT h#(!.'%!0).v AND PRESS
[
= KEY THET,#$EWILL SHOWWh.%7 0).v
5.Press number key to input the new PIN code and press
[
= KEY THET,#$EWILL SHOWWh#/.&)2- 0).v PROMPT) you to input the new PIN code again.
6.Input the new PIN code again and press [ 
] key to confirm the setting.
Note:
1.The PIN code must be 4 digits.
2.If the new PIN code that you input two times is different, the change will fail, the display will return to step 4.