Getting started
4.Thread the power cord from the power supply through the
AKVV ZRYXO ]YMUO^
AKVV ZYaO\ Y_^VO^
:YaO\ KNKZ^Y\ ZV_Q
Getting started
5.Align the holes on the bottom of the telephone base with the lugs on the front of the wall bracket. Slide the telephone base downward on the bracket until you hear it click into place.
To remove the 7300/7300a from the wall mounting bracket
6.Gently press the release tabs and lift the base up and forward to remove the base from the bracket.
7.Disconnect the power and line cords.
Helpline
If you are having any difficulties setting up or using your Telstra 7300/7300a, please call the TecHelp on 1300 369 193 or email: tcpsupport@ingrammicro.com.au
14 | 15 |