Teledex B150D manual Using the Data Port, Setting the Ring Cadences, Adjusting the Ringer Volume

DATA PORT

5) USING THE DATA PORT

The data port is located on the right hand side of the telephone (as it is facing you.) Use this jack to connect a laptop or desktop computer, fax machine or answering machine in parallel on the same phone line to which the telephone is connected. Plug one end of the modular cord into the DATA jack of the B150D, and then plug the other end into the jack of another phone or answering machine.

FIGURE 4

6) SETTING THE RING CADENCES

Follow these steps to select one of four different ringer cadences (telephone must be on-hook):

1)Press PRGM. The PROGRAM MODE prompt will appear.

2)Press REVIEW . The SET RING TONE prompt will appear.

4)Press PRGM key to select the desired ring tone. The current time display will return.

7) ADJUSTING THE RINGER VOLUME

Your phone has three ringer volume levels: OFF, LOW, AND HIGH. Follow these steps to adjust the ringer volume (telephone must be on-hook):

8) SETTING THE DATE AND TIME

Follow these steps to set the date and time:

1)Press PRGM. The PROGRAM MODE prompt will appear.

2)Press REVIEW with the month cursor flashing. SET DATE/TIME prompt will appear.

3)Enter the desired date using a number key.

4)Enter the current time using a number key when the hour cursor flashes.

*= AM #= PM appears.

5)Press * to select AM or # to select PM. The phone beeps and the set time display returns.