ProblemSolution
Dial tone is OK, but | • Make sure the TONE/PULSE switch on the base is |
can’t dial out | correctly set (see page 3). |
|
|
Handset does not ring | • Make sure the RINGER switch on the handset is |
| turned to ON. |
| • You may have too many extension phones on your |
| line. Try unplugging some phones. |
| • See solutions for “No dial tone.” |
|
|
You experience static, | • Change channels |
noise, or fading in | • Is handset out of range? Move closer to the base. |
and out | • Does the base need to be relocated? |
| • Charge battery. |
| • Make sure base is not plugged into an outlet with |
| another household appliance. |
|
|
Unit beeps | • Place handset in base for 20 seconds to reset the |
| security code. If that doesn’t work, charge battery for |
| 12 hours. |
| • Clean charging contacts on handset and base with a |
| soft cloth, or an eraser. |
| • See solutions for “No dial tone.” |
| • Replace battery. |
|
|
Memory Dialing | • Did you program the memory location keys correctly? |
| See page 6. |
| • Did you follow proper dialing sequence? See pp. |
| • Make sure TONE/PULSE switch is correctly set. |
| See p. 3. |
| • Did you reprogram numbers into memory after power |
| outage or replacing battery? |
|
|
11