RCA 29086 manual Setting the Local Area Code

SETTING THE LOCAL AREA CODE

The Caller ID unit uses the programmed area code to determine the number format to display when a valid Caller ID signal is received and is also used for the Dial Back feature.

1.To enter the Options menu, press the OPTIONS button. OPTIONS MENU < > appears.

2.Press the left or right arrow button until LOCAL AREA CODE appears.

3.Press the OPTIONS button to show the current local area code. The default is ---. The left-most digit or space flashes, indicating it is ready to accept the area code entry.

4.Press the left arrow button to choose 9-0 for the first digit.

5.When the desired digit is flashing, press the right arrow button to advance to the next digit.

6.Repeat steps 4 and 5 until all the digits for your area code are correct.

7.Press OPTIONS again to store the local area code and return to the LOCAL AREA CODE display.

NOTE: If you make a mistake while setting the local area code, you can delete the displayed area code by pressing the DELETE button.

14