RCA 29086 manual Setting the 10-DIGIT Regional Area Codes, Exiting the Options Menu

SETTING THE 10-DIGIT REGIONAL

AREA CODES

Depending on your telephone company and your location, it may be required that you dial a

10-digit number (area code + local number) for some calls. You can store up to six

10-digit regional area codes.

1.To enter the Options menu, press the OPTIONS button. OPTIONS MENU < > appears.

2.Press the left or right arrow button until 10 DIGIT AC's appears.

3.Press the OPTIONS button to show the current regional area code. The default is --- --- ---. The left-most digit or space flashes, indicating it is ready to accept the area code entry.

4.Press the left arrow button to choose 9-0 for the first digit.

5.When the desired digit is flashing, press the right arrow button to advance to the next digit.

6.Repeat steps 4 and 5 until all the digits for your regional area code are correct.

7.Press OPTIONS again to store the regional area code and return to the 10 DIGIT AC's display.

NOTE: If you make a mistake while setting the 10-digit AC's, you can delete the selected set of the area code by pressing the DELETE button.

EXITING THE OPTIONS MENU

1.Press the left or right arrow button until EXIT appears.

2.Press the OPTIONS button to exit the Options Menu.

15