Oricom TP88 New Call LED Indicator, Using Message Waiting / Mail Box, Desk and Wall Mounting

Page 14

records, deleting all calls will not work.

1.Press DOWN or UP to view any caller ID call information.

2.Press and hold DELETE for five seconds until “DEL ALL?” is displayed.

3.All calls are Deleted and the total call count in the display returns to zero.

C

New Call LED Indicator

The NEW CALL LED indicator will flash slowly to alert you if there have been any new incoming calls. The display will also indicate the number of new calls.

The NEW CALL LED indicator will keep flashing until you have reviewed all new calls. The “NEW” (new call number) counter on the display will become zero.

Using Message Waiting / Mail Box

NOTE: If you are using Telstra Messages 101 you will need to contact Telstra and request they enable the FSK signalling on your line

This product is designed to receive (FSK) Message Waiting indication from your Telephone service provider. For this feature to work, you must subscribe to this service with your local telephone company.

1.When a message is preceded by a ring is sent by telephone service provider, the

Message Waiting symbol will only appear on the display, and the NEW CALL LED will then flash.

2.After you have retrieved your message(s), the telephone company should send a clear

signal to your phone. The Message Waiting symbol will turn off until a new message is received.

Resetting Message Waiting Indication

The telephone company sometimes will not send a message clear signal to you, and then you will have to clear the message waiting indication manually. See trouble shooting section.

DESK AND WALL MOUNTING

Your TP88 can be mounted to a standard wall phone plate. lf you do not have a modular

wall phone plate installed, consult with your phone company or licenced installer to get

one, or install without a wall plate. NOTE: Screws and wall anchors are not supplied.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TP88 Big Button Speakerphone Contents Page Location of Controls Caller ID Parts ListKey phone features Page Answering Calls with the Speakerphone Answering and making Calls Using the HandsetTelephone Operation Making Calls with the SpeakerphoneSaving Numbers to One-Touch Memory M1 to M4 Using the Handset Volume ControlLast Number Redial Saving Numbers to Two-Touch Memory MEM 0 to MEM #Making Calls from the Two-Touch Memory Call TimerRecall Switch Listing Your Memory NumbersMenu Programming Instructions Accessing the MenuSetting DATE/TIME Select LauguageAdding Names and Numbers Using the Name and Number Phone BookLCD Contrast Press DIAL/SET use UP or Down to select Phonebook ADDDialling items from the Phone book Editing Phone Book EntriesPress DIAL/SET use UP or Down to select Phonebook Edit Caller ID Caller ID OperationResetting Message Waiting Indication New Call LED IndicatorUsing Message Waiting / Mail Box Desk and Wall MountingSlide OUT Reverse Slide Into Phone Mounting Bracket Base UnitInstallation on Masonry Wall Mounting without a Modular Wall Phone PlateTroubleshooting Cannot erase all records in memory Handset falls out of phone base when wall mountedLine Error appears on the LCD panel Caller ID display is blankTechnical support Customer support
Top Page Image Contents