Oricom TP88 manual Wall Mounting without a Modular Wall Phone Plate, Installation on Masonry

Page 16

Wall Mounting without a Modular Wall Phone Plate

1.Locate a wall stud. lf the selected area does not have a wall stud directly behind it, use dry wall expanders or a similar type fastener.

2.Drill 2 6mm holes 100 mm apart, as per template at the end of this user guide.

3.Fix a screw (not supplied) into each hole and leave 5mm of the head exposed to mount the phone.

4.Connect the TELEPHONE LINE CORD to the BASE UNIT and the wall jack.

5.Position the WALL MOUNT SLOTS on the bottom of the BASE UNIT on the 2 mounting screws and gently push down to lock into place.

IMPORTANT:

Before mounting the BASE UNIT on the wall, consider the following:

The location should be away from electrical cables, pipes, or other items behind the mounting location. Inserting screws into areas such as these can be dangerous. The location of the phone should be within 2m of the telephone socket.

Installation on Masonry

1.Using a 6mm masonry drill bit drill the 2 holes using template.

2.lnsert 2 plastic anchors and install the 2 screws.

3.Leave 5 mm of the screws exposed to mount the phone.

4.Position the WALL MOUNT SLOTS on the bottom of the BASE UNIT on the 2 mounting screws and gently push down to lock into place.

315/16 "

(100 MM)

MOUNTING AREA

MOUNTING SCREW

ANCHOR

3/16 " (5 MM)

LEAVE 3/16" (5 MM) SCREW EXPOSED

DRILL HOLE WITH 1/4" MASONRY BIT

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TP88 Big Button Speakerphone Contents Page Location of Controls Key phone features Parts ListCaller ID Page Answering and making Calls Using the Handset Telephone OperationAnswering Calls with the Speakerphone Making Calls with the SpeakerphoneUsing the Handset Volume Control Last Number RedialSaving Numbers to One-Touch Memory M1 to M4 Saving Numbers to Two-Touch Memory MEM 0 to MEM #Call Timer Recall SwitchMaking Calls from the Two-Touch Memory Listing Your Memory NumbersAccessing the Menu Setting DATE/TIMEMenu Programming Instructions Select LauguageUsing the Name and Number Phone Book LCD ContrastAdding Names and Numbers Press DIAL/SET use UP or Down to select Phonebook ADDPress DIAL/SET use UP or Down to select Phonebook Edit Editing Phone Book EntriesDialling items from the Phone book Caller ID Caller ID OperationNew Call LED Indicator Using Message Waiting / Mail BoxResetting Message Waiting Indication Desk and Wall MountingSlide OUT Reverse Slide Into Phone Mounting Bracket Base UnitInstallation on Masonry Wall Mounting without a Modular Wall Phone PlateTroubleshooting Handset falls out of phone base when wall mounted Line Error appears on the LCD panelCannot erase all records in memory Caller ID display is blankTechnical support Customer support
Top Page Image Contents