Oricom TP88 manual Using the Handset Volume Control, Last Number Redial

Page 8

Using the Handset Volume Control

You can adjust the volume level of the handset receiver by adjusting the volume control on the side of the handset during a conversation. There are two levels to adjust between: Normal and Loud (NORM-LOUD).

Last Number Redial

The TP88 will store the last 16 numbers you called. These are redialled as follows.

1.To redial the last number leave the handset on the base, press REDIAL repeatedly until you find the number you wish to dial.

2.When you find the number you wish to dial press the SPEAKER button or pick up the handset. The number will now dial.

Saving Numbers to One-Touch Memory (M1 to M4)

Note: When storing memory numbers, your phone must have batteries installed.

NUMBERS ONLY CAN BE STORED IN THESE MEMORIES.

1.With the phone on-hook, Dial the number you wish to dial (up to 16 digits) using the dial pad.

2.Then press the STORE button

3.Press the one-touch memory button that you wish to store the number in ([M1], [M2], [M3] or [M4]). The number is now stored.

4.Repeat steps 1 to 3 to store other numbers.

Saving Numbers to Two-Touch Memory (MEM 0 to MEM #)

1.Dial the number you wish to dial (up to 16 digits) using the dial pad.

2.Press the STORE button once.

3.Press any number on the dial pad that you wish to store the number in ([0] to [#]). The number is now stored.

4.Repeat steps 1 to 3 to store other numbers.

Note: There is a time-out for storing numbers. If the TP88 times out before the number is stored, try again.

MEMORY D AL NG

Making Calls from the One-Touch Memory

Follow the instructions below to dial a number from the one-touch memory:

1.Pick up the handset, or press the SPEAKER button to get a dial tone.

2.Press the memory number ([M1], [M2], [M3] or [M4]] button where the number is stored.

3.The number will be displayed and your call will be automatically dialled exactly as you programmed.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents TP88 Big Button Speakerphone Contents Page Location of Controls Caller ID Parts ListKey phone features Page Answering and making Calls Using the Handset Telephone OperationAnswering Calls with the Speakerphone Making Calls with the SpeakerphoneUsing the Handset Volume Control Last Number RedialSaving Numbers to One-Touch Memory M1 to M4 Saving Numbers to Two-Touch Memory MEM 0 to MEM #Call Timer Recall SwitchMaking Calls from the Two-Touch Memory Listing Your Memory NumbersAccessing the Menu Setting DATE/TIMEMenu Programming Instructions Select LauguageUsing the Name and Number Phone Book LCD ContrastAdding Names and Numbers Press DIAL/SET use UP or Down to select Phonebook ADDDialling items from the Phone book Editing Phone Book EntriesPress DIAL/SET use UP or Down to select Phonebook Edit Caller ID Caller ID OperationNew Call LED Indicator Using Message Waiting / Mail BoxResetting Message Waiting Indication Desk and Wall MountingSlide OUT Reverse Slide Into Phone Mounting Bracket Base UnitInstallation on Masonry Wall Mounting without a Modular Wall Phone PlateTroubleshooting Handset falls out of phone base when wall mounted Line Error appears on the LCD panelCannot erase all records in memory Caller ID display is blankTechnical support Customer support
Top Page Image Contents