Radio Shack ET-148 owner manual Connecting Handset

Page 7

43-637.fm Page 7 Friday, August 13, 1999 10:45 AM

1.Press in on the side of the bracket

nearest the DESK label and lift the bracket. Rotate the bracket 180° and insert it into the WALL slots, then push it upward to secure it.

2.Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the phone and plug the other end into a modular phone line jack. Then align the base’s key- hole slots with the wall plate studs (or screws) and slide the base downward to secure it.

3.Lift out the handset guide, rotate it 180°, then snap it back into place so it holds the handset.

Handset

Guide

Note: The handset holder above the handset cradle lets you place the handset on the holder without dis- connecting the call.

Handset

Holder

CONNECTING THE

HANDSET

Plug one end of the coiled cord into the modular jack on the handset. Then con- nect the other end to the jack on the side of the telephone base.

7

Image 7
Contents ET-148 Features FCC Statement Read this Before InstallationContents Testing/Replacing the Batteries Installing BatteriesPreparation Placing the Phone on a Desk Top Selecting a LocationMounting the Phone on a Wall Connecting Handset Connecting AN Optional AC Adapter Setting the Ringer Switch Setting the Dialing ModeSwitching Between the Handset and Speakerphone Using SpeakerphoneUsing Privacy Using RedialUsing Flash Using PauseStoring a Number in Memory Memory DialingDialing a Memory Number Testing Stored Emergency NumbersChain-Dialing Memory Numbers Problem Suggestion TroubleshootingFCC Wants YOU to Know Care and MaintenanceLightning Limited One-Year Warranty