SETTING THE DIALING MODE
Set MODE on the back of the base for the type of service you have (tone or pulse). If you are not sure which type you have, do this test.
1.Set MODE to TONE.
2.Lift the handset and listen for a dial tone.
3.Press any number other than 0.
Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code either.
4.If the dial tone stops, you have
If the dial tone continues, you have pulse service. Set MODE to PULSE.
SETTING THE RINGER SWITCH
Set RINGER on the back of the tele- phone to select the desired ringer vol- ume:
HI — Normal ringer volume.
LO — Reduced ringer volume.
OFF — The telephone does not ring
Note: With the phone’s ringer off, you can still make calls using the
9