RCA 25205 manual Ring Delay, Message Length

Connections and Setup

8.Press the Sel/Save button to start recording. Speak within 6 inches away from the Mic located under Speaker button.

9.Press Sel/Save again to stop recording.

10.The OGA is played automatically for your verification. It will then return to the OGA REC menu to start over or to record another OGA.

Ring Delay

This feature allows you to set number of rings before the unit answers the incoming call.

1.Press the Menu button.

2.Use the 5 or 6 to scroll to ANSWERING SYS.

3.Press the Sel/Save button.

4.Use the 5 or 6 to scroll to RING DELAY.

5.Press the Sel/Save button.

6. Use the or } to scroll to L1 or L2.

7.Then use 5 or 6 to scroll to the desired ring delay - 2, 3, 4, 5, 6 rings, TOLL SAVER. For TOLL SAVER selection, the unit will answer on the 3rd ring if new voice messages have been recorded or on the 5th ring if there are no new voice messages.

8.Press the Sel/Save button to save. To start over, press the Exit button to return to the ANSWERING SYS menu.

Message Length

This is to limit the length of the incoming caller’s message.

1.Press the Menu button.

2.Use the 5 or 6 to scroll to ANSWERING SYS.

3.Press the Sel/Save button.

4.Use the 5 or 6 to scroll to MESSAGE LENGTH.

5.Press the Sel/Save button.

6. Use the or } to scroll to L1 or L2.

7.Then use 5 or 6 to scroll desired option - 1 MINUTE, 2 MINUTES or NO LIMIT.

8.Press the Sel/Save button to save. To start over, press the Exit button to return to the ANSWERING SYS menu.

20