Radio Shack TAD-799 owner manual Using Remote Commands

Page 17

43-799.fm Page 17 Monday, August 16, 1999 9:43 AM

USING REMOTE

COMMANDS

Follow these steps to operate the TAD from a touch-tone phone or a pulse (ro- tary) phone with a pocket tone dialer.

1.Dial your phone number.

2.When the TAD answers, enter your remote operation security code. The TAD beeps once to confirm that you entered the correct code.

Notes:

•If you do not enter each digit of the security code within 8 sec- onds, the TAD hangs up.

•Even if the TAD is not set to answer calls, it will answer after about 60 seconds.

3.Enter a remote command (see “Remote Commands” on Page 18).

4.When you finish, simply hang up.

17

Image 17

Contents TAD-799 Features Fm Page 3 Monday, August 16, 1999 943 AM FCC Statement Read this Before InstallationContents Choosing a Location InstallationInstalling Backup Battery Connecting to the Telephone Line Connecting to Power Preparation Setting the DAY and TimeRecording the Outgoing Message Basic Operation Setting the Number of RingsSetting the TAD to Answer Calls Playing Messages Recording Incoming MessagesScreening Calls Repeating Messages Recording a Memo Erasing MessagesChanging the Remote Operation Security Code Using TOLL-SAVERRemote Operation Remote ANSWER-ON Using Remote Commands Press Remote CommandsProblem Suggestion TroubleshootingCare and Maintenance Lightning FCC Wants YOU to KnowFm Page 22 Monday, August 16, 1999 943 AM Fm Page 23 Monday, August 16, 1999 943 AM RadioShack Division of Tandy Corporation Fort Worth, Texas