PREPARATION
SETTING THE DAY AND TIME
Follow these steps to set the day and time so the TAD records the correct day and time of the call with each phone message.
Notes:
•To avoid having to reset the time if AC power is lost, we recommend you install a battery before you set the day and time.
•If you do not complete any step within 8 seconds, the TAD sounds a
1.Press and hold SET until the TAD beeps. The TAD announces, “Sun- day,” and 01 appears on the dis- play.
Note: If necessary, adjust VOLUME on the right side of the TAD to the desired listening level.
2.To change the day of the week, repeatedly press REPEAT to move backward or SKIP to move forward until the TAD announces the desired day of the week.
3.Press STOP. The TAD beeps once and announces the time format, “AM” or “PM.”
4.To change the hour, repeatedly press REPEAT until you hear the desired hour.
5.Press STOP. The TAD beeps once to confirm the hour setting.
6.To change the minutes, repeatedly press REPEAT until you hear the desired minute setting.
7.Press STOP to confirm the settings. The TAD beeps and announces the day and time.
To check the current day and time at any time, press SET.
9