Radio Shack TAD-795 owner manual Recording the Outgoing Messages

Page 8

43-795.fm Page 8 Monday, August 16, 1999 9:07 AM

1.Hold down TIME SET until a number from 17(the day of the week) ap- pears and the TAD announces the currently set day.

2.To change the day of the week, re- peatedly press REPEAT to move backward or SKIP to move forward until the TAD announces the desired day of the week.

3.Press TIME SET. The TAD announc- es the preset hour.

4.To change the hour, repeatedly press REPEAT or SKIP.

5.Press TIME SET. The TAD announc- es the preset minute.

6.To change the minutes, repeatedly press REPEAT or SKIP.

7.Press TIME SET to confirm the set- tings. CL appears, then the TAD beeps and announces the day and time.

To check the current day/time at any time, press TIME SET.

8

RECORDING THE OUTGOING MESSAGES

Before the TAD-795 can answer calls and record messages, you must record an outgoing message (OGM). The TAD lets you record two separate messages of up to 32 seconds each, and it oper- ates differently based on which mes- sage you select.

OGM 1 – After playing your outgo- ing message, the TAD records the caller’s message.

OGM 2 (announce-only) – The TAD plays your outgoing message, but does not record a message.

If you plan to use the TAD’s announce-only feature, OGM 2 should clearly state that the caller cannot leave a message.

The TAD-795 lets you store messages for up to four different users. It normally records messages in mailbox 1, but a caller can choose a different mailbox by pressing # and its number (1–4) after the outgoing message. Be sure your outgo- ing message tells the caller how to record a message for the desired mail- box.

Hint: Do not tell callers that you are out of town or not home. Instead, say that you cannot come to the phone right now.

Follow these steps to record your outgo- ing message.

Image 8
Contents TAD-795 Features LED Message Counter shows Read this Before IN- Stallation FCC StatementContents Connecting the AC Adapter PreparationInstalling a Backup Battery Setting the DAY and TimeRecording the Outgoing Messages Setting the Number of Rings Checking the Outgoing MessagesIncoming Message Recording Setting the TAD to Answer CallsBasic Operation Screening Calls Playing MessagesDeleting Messages Recording a Memo Recording a ConversationUsing Call Breakthrough Changing the Remote Operation Security CodeRemote Operation Using the TOLL-SAVERUsing Remote Commands Remote Commands Troubleshooting Resetting the TADCare and Maintenance FCC Wants YOU to Know LightningRadioShack Division of Tandy Corporation Fort Worth, Texas