1.To record the OGM 1 (or OGM 2) message, hold down OGM 1 (or OGM 2) until the TAD beeps and the timer starts counting.
Note: As soon as the TAD beeps, release OGM 1 (or OGM 2) quickly. Otherwise, the TAD records a “pop” sound at the beginning of the outgo- ing message.
2.Speak your message from about 8 inches from the front of the TAD.
3.When you finish, press STOP. The TAD beeps and plays back the out- going message.
SETTING THE NUMBER OF RINGS
Set the ring select switch to 2, 4, 7,or TS to set how long the TAD waits before it answers a call (2 rings, 4 rings, 7 rings or
If you plan to check your messages by long distance, set the ring select switch to TS (see “Using the
Checking the Outgoing
Messages
To check an outgoing message, press its button (OGM 1 or OGM 2). You see the announcement number and the message plays.
If there is no announcement recorded, you hear “You have no announcement one” (or “two”) when you press its but- ton.
9