Radio Shack ET-1126 owner manual Replacing the Battery Pack

Page 25

43-1126.fm Page 25 Thursday, April 27, 2000 11:23 AM

REPLACING THE BATTERY PACK

If you follow the instructions in “Connecting and Charging the Battery Pack” on Page 10, the battery pack should last about one year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6-volt, 600 mAh bat- tery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store.

Install the new battery pack, then charge it for about 24 hours.

1.Press down and slide off the battery pack compartment cover.

2.Lift the battery pack out of the compart- ment, then gently pull on the battery connector to disconnect it.

3.Insert the new battery pack’s connector into the socket in the compartment, place the battery pack into the compart- ment, and replace the cover.

Warning: Dispose of the old battery pack promptly and properly. Do not burn or bury it.

Cautions:

•You must use a replacement battery pack of the same size and type.

•Do not dispose of the battery pack in a fire because it might explode.

•Do not open or mutilate the battery pack.

•Be careful not to short the battery pack by touching it with conducting materials, such as rings, bracelets, and keys. The battery pack or conductor might over- heat and burn.

If you have trouble replacing the battery pack, take the phone to your local Ra- dioShack store for assistance.

Important: This phone can use nickel-cadmium re- chargeable batteries. At the end of a nickel-cadmium bat- tery’s useful life, it must be re- cycled or disposed of

properly. Contact your local, county, or state hazardous waste management authorities for information on recycling or disposal pro- grams in your area or call 1-800-822-8837. Some options that might be available are: municipal curbside collection, drop-off boxes at retailers such as your local RadioShack store, recycling collection centers, and mail- back programs.

Care and Maintenance

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 24 Page 26
Image 25
Page 24 Page 26
Contents With Caller ID and Call Waiting ID Contents Troubleshooting Care and Maintenance Features Important Caller ID Information Read this Before InstallationFCC Statement Important Safety Instructions Save These Instructions Battery Safety InstructionsMounting the Phone InstallationOn a Desk Top, Shelf, or Table On a Wall Plate or Wall Connecting and Charging the Battery Pack Press Delete to erase information if you make a Mistake Quick Look AT the HandsetSetting the Ringer TONE/VOLUME Setting the Dialing ModeTurning Auto Talk ON/ OFF Turning Caller ID/ Call Waiting ON/OFF OperationStoring Your Area Code Making and Receiving CallsUsing Hold Using SpeakerphoneUsing Flash Using MuteUsing Redial Using Tone Services on a Pulse LineMemory Dialing Using PAGE/INTERCOMTransferring a Call Between the Handset and Base Storing a Number in the Handset’s MemoryEditing or Deleting a Number in the Handset’s Memory Entering a Pause Storing a Number in the Base’s MemoryReviewing the Handset’s Memory Numbers Dialing a Memory NumberChain-Dialing Service Numbers Using a HeadsetTesting Stored Emergency Num- bers Caller ID OperationAdding/Deleting the Area Code Caller ID MessagesDialing Numbers from a Caller ID Record Deleting Caller ID Records Storing a Caller ID Record to MemoryTroubleshooting Fm Page 23 Thursday, April 27, 2000 1123 AM Care and Maintenance Replacing the Battery Pack Lightning FCC Wants YOU to KnowFm Page 27 Thursday, April 27, 2000 1123 AM Limited One-Year Warranty
Top Page Image Contents