Then, repeatedly press VOL/CID 9 to scroll through the Caller ID records from the new- est to the oldest, or VOL/CID 8 to scroll back through the records. To scroll quickly through the records, hold down VOL/CID 8 or 9.
When you scroll past the last record, total record number appears, then the first record. When you scroll past the first record, the total record number appears, then the last record.
The top line of each record shows the date, time and the number of calls from that num- ber. The second line shows the caller’s name, and the third line shows the caller’s phone number.
To exit the Caller ID record display, press
CALL ID.
Caller ID Messages
Display | Description |
|
|
|
|
New:XX | Shows the number of new Caller ID records (records you have not |
Total:XX | reviewed) and the total number of records. |
|
|
Private Name | The caller has blocked the Caller ID information. |
or |
|
Private Number |
|
|
|
Unknown Name | The caller is not within a Caller ID service area. |
or |
|
Unknown Number |
|
Incomplete | Appears if there was an error during the transmission of Caller ID infor- |
Data | mation. Occasional errors are normal. If the phone frequently displays |
| Incomplete Data, contact your local telephone company or RadioShack |
| store. |
|
|
Adding/Deleting the Area Code
When the area code of the received call is the same as the one you stored (see“Storing Your Area Code” on Page 13), the caller ID record does not show the area code. If it is different, the record shows the area code.
However, you can add or delete the area code on the display. When the record is on the display, press 3 to add or delete the area code. Pressing 3 again deletes or adds the area code.
When you dial the number or store it into memory, the phone dials or stores the num- ber as it appears on the display.
Dialing Numbers from a Caller ID Record
To dial a local number stored in a Caller ID record, recall the record, then press TALK. If it is a long distance call, press 1 (1 appears before the displayed number) before you press TALK. If you want to add or delete the area code, press 3 before you press TALK.
Note: If a Caller ID record does not contain a phone number (if it was blocked by the caller, for example) you cannot dial from that record.
20 |
| Operation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|