#"+/2146#06"#
The EPA certified RBRC® Battery Recycling Seal on
the nickel-cadmium (Ni- Cd) battery indicates RadioShack is volun- tarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE- SHACK (1-800-843- 7422) for information on Ni-Cd battery recycling and disposal bans/ restrictions in your area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.
2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the bottom of the phone’s base.
4.Route the adapter and modular cords through the grooves on the back of the base.
5.Align the base’s keyhole slots with the mounting screws and slide the base downward to secure it.
6.Plug the modular cord’s other end into the phone jack, and plug the adapter into a standard AC outlet.
%100'%6+0)1%*#4)+0)" 6*'"$#66'4;"2#%-
The phone comes with a rechargeable nickel-cadmium battery pack in the handset, but not connected. Before using your phone, you must connect the battery pack, then charge it for about 15–20 hours. #
Be sure the battery pack is properly connected before you try to charge it. The CHARGE/IN USE indicator lights
