6740+0)"%#..'4"+&1%#.." 9#+6+0)"1011((
If you subscribe to Call Waiting with Caller ID service, you can set the phone to show Caller ID information for an incoming call even while you are using the phone.
1.Lift the handset and hold down
CID/MENU until the menu appears with 7kje JWba selected.
2.Press 2 or 9to move the cursor to 9?:9M0 (Caller ID/Call Waiting).
3.Press SEL to turn the Caller ID/Call Waiting setting on or off. Ed or E\\ appears indicating the selected setting.
4.Return the handset to the base or press END to store the new setting.
5614+0)";174"#4'#" %1&'
You can store your local area code in the phone’s memory so it will not show the area code if you receive a local call. If you need to add or store the area code for a local number, you can add it afterwards (see “Adding/Deleting the Area Code” on Page 35).±
±"016'"±"
If an area code is already stored, it appears on the display after you hold down
CID/MENU. Press CH/
DEL three times to delete the area code. Then enter your area code.
Installation
17