The Integrated Answering Device
Ô NOTE Ô
•Normally the idle time for the menu mode is 10 seconds before the system returns to standby. However for setting the time, the idle time is extended to two minutes.
•Press and hold SELECT/
VOLUME/ or SELECT/ VOLUME/ to quickly scroll through the numbers on the display.
Setting the Time
The clock on the answering system starts when power is supplied to the base. Follow these steps to set the clock to the correct time. Ô
1.Press clock/menu.
The system announces “Time”, the current time and the guidance for setting the time.
2. Press SELECT/VOLUME/ or SELECT/VOLUME/ until the correct day is announced. The numbers [ ] through [ ] are displayed on the
base.
3. Press set to select the day.
4. Press SELECT/VOLUME/ or SELECT/VOLUME/ until you hear the correct hour setting. The
numbers [ ] through [ ] are displayed on the base as each hour is announced.
5. Press set to select the hour.
6. Press SELECT/VOLUME/ | or SELECT/VOLUME/ |
until you hear the correct minute setting. The | |
numbers [ ] through [ | ] are displayed on the |
base as each minute is announced.
7. Press set to select the minute.
8. Press SELECT/VOLUME/ or SELECT/VOLUME/ until you hear the correct AM or PM setting.
The message counter displays [ ] or [ ].
9. Press set to select the AM/PM setting.
You hear a confirmation tone, then the announcement “Time” and the time and day are announced for your review. After a few seconds, the system announces “To set security code, press menu again”.
20