Radio Shack 43-3823 owner manual Additional Information, Installing the Optional Beltclip

Page 32

Additional Information

ADDITIONAL

INFORMATION

INSTALLING THE OPTIONAL BELTCLIP

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

HEADSET INSTALLATION

You can connect an optional headset with a 3/32- inch (2.5-mm) plug. Contact RadioShack for a suitable headset.

To connect the headset, open the rubber cover on the side of the handset, then insert the headset’s plug into the jack.

When you finish using the headset, disconnect it from the handset and close the rubber cover to protect the jack.

32

Image 32
Contents 4GHz Cordless Phone With Answering MachineImportant Safety Instructions ContentsContents Battery Safety Instructions Read this Before Installation IntroductionIntroduction Mounting the Phone InstallationOn a Desk Top On a Wall Plate or Wall CONNECTING, Charging and Replacing the Battery Pack Installation Depending on your dialing system, set the mode as follows Recycling Ni-Cd BatteriesOperation Making and Receiving CallsTemporarily Mute Ringer Earpiece VolumeHandset Ringer Tone Flash and Call Waiting Traveling OUT-OF-RANGESelecting a Different Channel Memory Dialing Storing Phone Numbers in MemoryMaking Calls with Memory Dialing Chain DialingTesting Stored Emergency Numbers Erasing a Stored Number from MemoryONE-TOUCH Speed Dial Storing the Speed Dial ÔDeleting the Speed Dial Integrated Answering DeviceMaking Calls with the Speed Dial Features Turning the Answering SystemUsing the Menu Mode Setting UP Your Answering SystemSetting the Time Setting a Personal Security Code PIN Setting the Ring TimeAnnounce only feature Selecting the message Record TimeSetting the Message Alert tone Selecting the Language Setting Your Outgoing Message Greeting Preset messageRecording a personal outgoing message Greeting Ô Choosing between the two outgoing messagesTemporarily Mute the Base Ringer Setting the base ringer volumeAdjusting the speaker volume level Repeating a message Using Your Answering SystemPlaying your messages Skipping a message Deleting a messageVoice memo Recording a conversationRemote access away from home Command FunctionTurn on the answering system remotely Installing the Optional Beltclip Headset InstallationAdditional Information To attach the beltclipTroubleshooting Problem SolutionIncoming messages may be too long. Remind callers to Care FCC StatementSurge Protection FCC StatementPage Page Page Limited One-Year Warranty